If your Vivo Y1s PD2014F smartphone is stuck on the logo, facing software issues, boot loop, or hang on logo problems, then flashing the official stock ROM can fix your device. In this guide, you will get the Vivo Y1s PD2014F Flash File, flashing tools, drivers, and a step-by-step installation process to restore your device to factory condition.
Why Download Vivo Y1s PD2014F Flash File?
Flashing the Vivo Y1s PD2014F stock firmware helps in fixing boot loop or stuck on logo issues, solving system errors and crash problems, removing pattern lock, pin lock, or password, unbricking your Vivo Y1s PD2014F, restoring the phone to factory settings, fixing IMEI issues after corruption, and downgrading or upgrading the firmware.
Vivo Y1s PD2014F Flash File (Stock ROM) Details
Device Model: Vivo Y1s
Model Number: PD2014F
ROM Type: Official Stock ROM
Android Version: Android 10 (Based on Funtouch OS)
File Size: ~2GB – 3GB
Processor: MediaTek Helio P35 (MT6765)
Firmware Type: Scatter File + Flash Tool Support
Password: May be required for extraction (provided with download link if applicable)
Download Vivo Y1s PD2014F Stock ROM (Flash File)
TeamViewer Services: WhatsApp Number: Gsm Amit +917004701944
TeamViewer Services: 100INR
Subscribe You Channel. More Updates: Click Here
TESTED 100% 2025
Note: Flashing At Your Own Risk. I am Not Responsible For any Damage.
| File Name | Download Link |
|---|---|
| Vivo_Y1s_PD2014F_EX_A_1.70.38_vivo_mtk_Flash_File_(Www.GsmAmit.Com) | Download Now |
| QCOMM MTK USB Drivers | Download Now |
Always download firmware from a trusted source to avoid malware or corrupted files.
Required Tools & Drivers
Before flashing, make sure you have the following:
- Vivo Y1s PD2014F Flash File (Stock ROM)
- SP Flash Tool – For flashing MTK devices
- MTK USB Drivers – For PC to detect your phone
- Vivo ADB & Fastboot Tools – Optional
- USB Cable – Original or good quality
How to Flash Vivo Y1s PD2014F Stock ROM
Warning: Flashing firmware will erase all data from your device. Backup your data before proceeding.
Step 1: Extract Downloaded Files
Download the Vivo Y1s PD2014F Flash File and extract it on your PC. Extract the SP Flash Tool and USB Drivers as well.
Step 2: Install MTK USB Drivers
Open the driver folder, run the setup file, and install it so your PC can detect the Vivo device in flash mode.
Step 3: Open SP Flash Tool
Launch flash_tool.exe from the SP Flash Tool folder. Click on Scatter-loading file and browse for MT6765_Android_scatter.txt from the extracted ROM folder.
Step 4: Load Firmware & Select Options
Make sure “Download Only” is selected. Untick the preloader option (recommended to avoid hard brick).
Step 5: Connect Your Device
Power off your Vivo Y1s PD2014F completely. Hold Volume Up + Volume Down and connect it to the PC via USB.
Step 6: Start Flashing
Click Download in SP Flash Tool and wait until the process completes. You’ll see a green tick on success.
Step 7: Reboot
Disconnect your phone and power it on. The first boot may take 5–10 minutes.
Benefits of Using Official Vivo Y1s PD2014F Flash File
100% virus-free and safe, compatible with SP Flash Tool, fully tested and verified firmware, restores device performance and stability, supports IMEI repair when used with WriteIMEI tools.
Common Issues & Fixes After Flashing
Device stuck on logo after flashing – Try factory reset from recovery.
IMEI null or invalid – Use MTK IMEI repair tool.
Tool not detecting phone – Reinstall MTK USB drivers or try a different USB port.
BROM error – Use a different SP Flash Tool version or check the scatter file.
Precautions Before Flashing Vivo Y1s PD2014F
Ensure your phone battery is charged above 50%, use original USB cable for stable connection, download the correct firmware version for your model, and backup NVRAM & IMEI before flashing.
Vivo Y1s PD2014F Firmware FAQs
Q1: Is this Vivo Y1s PD2014F flash file official?
Yes, the firmware provided is the official stock ROM.
Q2: Can I use this file to unlock pattern lock?
Yes, flashing will remove any pattern, pin, or password lock.
Q3: Will flashing erase my data?
Yes, all personal data will be erased.
Q4: My phone is dead, can this file fix it?
If it’s a software-related issue, then yes, flashing can fix it.
Q5: Do I need a password to extract the firmware?
Some files may be password protected, and the password will be mentioned with the download link.
Final Words
If your Vivo Y1s PD2014F is facing serious software issues, installing the official stock ROM is the best solution. By following the above guide and using the Vivo Y1s PD2014F flash file, you can easily fix boot loop, hang on logo, and other software problems. Always ensure you download firmware from a trusted source to avoid further damage.
📚 Related Posts:
- Tecno Spark 8C KG5k Flash File (Stock File)
- Vivo Y91C PD1818HF Flash File (Stock ROM)
- Tecno Camon 16 CE7 Flash File (Stock ROM)
